it | en
Menu

GAMMA PRODOTTI

STANDARD

  • Tilting movement of the blade through handwheel (0-46°).
  • 2-Axes scoring unit with manual adjustment.
  • Motorized lifting of the blade (0,1 mm each impulse).
PLUS

  • Motorized tilting of the blade unit through linear actuator.
  • Electronic digital display of tilting.
  • Scoring unit with motorized adjustment and automatic vertical positioning ON-OFF.
EVO

  • 3-axis electronic positioner with display.
3 DIGIT

  • Programmed management of the 3 axes.
5 DIGIT

  • Programmed management of the 5 axes main and scoring blade.

OPTIONAL

Double angular fence - tilted cuts +45° -45°
+30° -45° tilting fence
Small table for parallel cuts
Height compensation kit
Pneumatic clamp (3200 mm)
Air flotation table on steel balls with panel pressure regulator
Optional 7° - 10v - 12° - 12° PC

VIDEO

Panel saws

QUADRA 400

… + + + + + + +
TECHNICAL DATA
OVERALL DIMENSIONS
PRODUCTS OF THE RANGE
OPTIONALS

SAW UNIT

  • 3000- 4000- 5000 rpm
  • 0,55 kW - 0,75 Hp [50 Hz]
  • Lifelong guaranteed tilting saddles in spheroidal cast iron.
  • Motorized movements through linear actuators.
  • Tilting blade unit completely manufactured in cast iron.
  • Vertical sliding of the blade through self-lubricating bushings.i.
  • Suction hood with internal dust conveyors for dust to guarantee maximum suction (hood diameter 80 mm).
  • Mobile guard sliding on linear guide to make easier working bulky pieces (h 170 mm).

SCORING UNIT

  • Scoring unit with motorized adjustment and automatic vertical positioning ON-OFF.
  • Automatic lowering of the scoring unit under the working table at turning off.
  • Double scoring blade with manual adjustment from 2.8 to 3.6 mm (with scoring unit not in motion).
  • Led scoring unit.

SLIDING TABLE

  • Aluminium carriage sliding on hardened and polished steel bar guides.
  • Upper and lower frame of the sliding table with ribs to increase its structural rigidity.
  • No. 8 scrapers (cleaners) with cutting angle for accurate cleaning of the sliding guides.
  • 10 years warranty on smoothness and integrity of the bars and rollers in hardened and polished steel.
  • Start on the head of the sliding table.
  • Sliding table locking in all positions.
  • No. 8 scrapers to clean the sliding table guides.
  • Safety micro switch on the opening of the blade guard and on the compartment of the belt change in the table.

MOTORIZED RIP FENCES

  • Programmed rip fence with transmission through re-circulating ball screw.
  • Rip fence programmed driven by re-circulating ball screw and precision linear guide. Translation speed max. 15 m /1'.
  • Rip fence unit hiding completely under the working table.
  • Rip fence with micrometric adjustment.
  • Electronic display for rip fence.
  • Rip fence EVO DIGIT PROGRAM.

CROSS CUT FENCE

  • Plates for fix positioning of the flip over stops (no. 5)
  • Tilting cross cut fence with provision for height compensation kit.
  • Increased flip over stop with locking lever and display of the height with LED lighting.
  • Increased cross cut fence with provision of compensation of the height in relation to the tilting angle.
  • Available no. 1 or 2 electronic read-outs for the extensible fence with compensation of the height in relation to the tilting angle. LED lighting of the height.

CROSS CUT CARRIAGE

  • Cross-cut carriage 1280x630mm with skids to ease sliding.
  • Telescopic extension of cross-cut carriage.
  • Tilting cross-cut carriage -47°, 0°, +47°.
  • Second cross-cut carriage.

SOFTWARE

3 DIGIT

  • PLC SIEMENS S71200 for the management of the 3 axes.
  • Possibility to memorize up to 100 working programs.
  • Programming of the height, the tilt and the position of the fence with automatic correction.
  • Automatic calculation of the upper and lower height of the panel to cut.
  • Complete menu for multiple cuts and automatic height calculation for profile fence change.

5 DIGIT

  • PLC SIEMENS S72100 for the management of the 5 axes BLADE + SCORING.
  • Programming of maximum 10 sequential heights of the 3 axes for each program.
  • With the IOT module present on the machine, 3DIGIT and PROGRAM can be connect to the company network and the web, allowing the generation of data aimed at monitoring the operation, productivity and historicization of the production processes of the machine.